UEE21020 Certificate II in Fire Alarms Servicing Certificate

Get Online Assignment Help on UEE21020 Certificate II in Fire Alarms Servicing Certificate

Introduction

Fire can spread anywhere and causes much damage to the site or the building. To prevent damage to the building and to safeguard the security of the people, almost every building is equipped with a fire alarm system. Whenever there will be smoke in the building, this alarm will start buzzing which will eventually inform people regarding the spreading of fire in the building. Usually, these buildings also have an evacuation plan so that it will be easy for people to save themselves. The cause of the fire is a defective instrument /tool or it is done purposely because fire tends to vanish all the essential proof regarding many other cases. There are factories which require the need of fire to produce various raw materials and manufactured tool and due to carelessness, fire tends to cause or due to defective instrument. For example, the damaged and old car sometimes causes fire due to faulty fuel lines. The role of the fire extinguisher is to look after the debris and the leftover of the fire and collect all the information and make out a storyline of the cause. The most challenging part of the fire extinguisher job is that there are multiple causes of the fire and it is complex to find out the exact cause behind the fire. There can be a possibility that the future could be raised from the fervor things such as match stick, fuels, and the explosion of any bomb with the flammable instrument. Incidents have been seen in the gas factory, due to carelessness and the leakage of the gases has caused great harm to the factory with fire. Fire extinguishers or the investigator is required to search for the source of the fire. Hence, these instruments need servicing and maintenance at regular intervals of periods. This fire alarm acts as an instrument that can prevent many accidents. It is essential to monitor and maintain them. There are different types of fire alarm systems:

1. Conventional Fire alarm system
2. Addressable fire alarm system
3. Analogue Addressable fire alarm system
4. Wireless fire alarm system.

The maintenance of all these systems must be ensured regularly.

Qualification Required

The qualification for the learner who wanted to pursue higher studies in this Assignment must have certain experience in this field. The learner must be good at analyzing, making judgments about certain topics, designing, technical things, and many more. A learner must be a good manager who should listen to his team members and work following them. It is his responsibility to take care of his members and safeguard their interests. They must be assertive and handle the pressure well. There should be mutual and fair communication between his team members and him. The learner must go through the checklist provided for the servicing of the fire alarm.

1. Checking the status of fire alarm status using the control panel.
2. Check the detectors’ panel
3. Checking the call points.
4. Performing the routine test of the fire alarm
5. Inspect for the damage and monitor the working of the fire alarm.

Entry requirement

Though there are no requirements for entry in this Assignment of certificate II in fire alarm servicing. But as per the demand of the sector, the person should be managed and updated to work in this field. It would be great if the learner already had some of the experience or knowledge in this sector. The field of interior requires patience a lot, thus there should be some of the skills that a learner must-have for the betterment.

Assignment details

The Assignment has 08 units that must be completed by the learner. Out of the 08 units, 04 are core units and the rest 04 are the elective units.

For the elective units following information must be considered

• 05 elective units must be selected from the elective list below.
• 05 elective unit may be selected either from the list below or from elsewhere within this training package or imported from any other endorsed Training Package

• There is no choice for the learner in core units. A learner must complete and pass all the core units.
• However, a learner has the choice in selecting the elective units.
• There are further elective units. The details of the elective units can be collected from the official site of the page

Benefits

There are many benefits offered to the learners. Many incentives and training are provided to the learners. Scholarships are also awarded. The government also provides loans to students who are not able to afford this Assignment. The Assignment of fire alarm servicing certificate is for students that have immense interest in this process. The students know the needs and demands of consumers. Many universities offer diplomas in this field. Students can pursue diploma Assignments in this field. And if a student wanted to pursue higher studies in the same field then the Assignment of advanced diploma in fire protection inspection and testing is for them. There is a training program developed for the people who wanted to take their career at an advanced level from this Assignment. There are many programs designed for the advanced level in this Assignment. As per the records, the people who already have pursued the Assignment are happy with the advanced diploma in this Assignment. There are about 74% of the people who are satisfied with the Assignment of advance diploma. Furthermore, as per the records, this improves the status of work after this Assignment of the employees is 53% which is a good number. Besides these two advantages, there is a hike in the salary of the people after the completion of this Assignment. This Assignment will surely give students more creativity and ease of presenting themselves.

Get UEE21020 Certificate II in Fire Alarms Servicing Certificate Assessment Answers from Assignmenthelp Experts.