Your question:

Every computer that participates in TCP/IP will have a routing and ARP table. Usually their route table will be short and simple as there is little to route. The most important entry will be the default gateway entry (with destination 0.0.0.0), which should indicate that the packet will be directed to a default gateway.

Do the following:

Assignment Help Answers with Step-by-Step Explanation:

When you issue the route print -4 command in the Windows command line, you'll see the IPv4 routing table. Here's what you might notice:

• Destination Network: You will see a list of destination network addresses, represented in CIDR format (e.g., 0.0.0.0/0 for the default route, or specific network addresses like 192.168.1.0/24 for local subnets).

ARP Table (arp -a):

When you issue the arp -a command, you'll see the ARP (Address Resolution Protocol) table. Here's what you might notice:

• Switching: ARP plays a crucial role in switching. When your computer needs to communicate with a device on the same local network, it uses ARP to discover the MAC address associated with the destination IP address. Switches use MAC addresses to make local forwarding decisions.

• Routing: The route table helps your computer make routing decisions. It specifies which gateway (router) to send packets to in order to reach different destination networks, including the default gateway for traffic not matching any specific routes.