Workplace practical tasks checklist and assessment record

	1

		Student ID*
Course*

Unit*	CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry

#2nd attempt to be used under compassionate and compelling circumstances only.

Student Declaration

This Workbook incorporates the following unit:

CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry

	CPC08 Construction, Plumbing and Services Training Package

Page 3

CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry
This unit of competency specifies the outcomes required to carry out OHS requirements through safe work practices at any on or off-site construction workplace. It requires the performance of work in a safe manner through awareness of risks and work requirements, and the planning and performance of safe work practices with concern for personal safety and the safety of others.

This unit of competency covers fundamental OHS necessary to undertake work tasks within any sector in the construction industry. It includes the identification of hazardous materials, including asbestos, and compliance with legislated work safety practices. It does not cover removal of asbestos, which is a licensed activity.

Safety risks in the work area are identified, assessed and reported to designated personnel.

Safe work practices, duty of care requirements and safe work instructions are followed for controlling risks.

Hazardous materials that have safety implications for self and other workers are secured immediately they are identified, using appropriate signs and symbols.

Asbestos-containing materials are identified on a work site and reported to designated personnel.

Plan and prepare for safe work practices.

Correct personal protective equipment and clothing for each area of construction work are identified, worn, correctly fitted, used and stored according to enterprise procedures.

Procedures and relevant authorities for reporting hazards, incidents and injuries are used. Prohibited tools and equipment in areas with identified asbestos are recognised and not used. Work site safety signs and symbols are identified and followed.

Work site area is cleared and maintained to prevent and protect self and others from incidents and accidents and to meet environmental requirements.

Emergency first aid treatment of minor injuries is carried out correctly and details of any treatment administered are reported accurately to designated personnel as soon as possible.

Prerequisite units: Nil
https://training.gov.au/Training/Details/CPCCOHS2001A

Assessment Workbook
Assessment Overview
To be deemed competent in this unit of competency, the Learner must successfully complete the following:

The tasks include: Task 1: Written/Verbal Questions

Assessment Task 1 – Written/Verbal Questions Instructions
•

•

•	The Trainer and Assessor will conduct reasonable adjustment should this be identified, and
documented.
•

•
•
Learner Name, date completed, and submitted alongside this Assessment Task.

Assessment Task 2 – Workplace Practical/Simulation Tasks

•

•	Multiple assessment of the same tasks may be necessary to ensure a satisfactory standard.
•	An observation checklist will be conducted during the completion of this task, your Trainer will

•

•
if determined suitable by your Trainer and Assessor. Please ensure that you discuss this with your Trainer if you are unsure.
•	If the conditions of these Assessment tasks cannot be replicated in a real-life work task on the

Assessment Workbook CPCCOHS2001A Apply OHS requirements, policies and procedures in the
		Training Package

Assessment Overview
In order to be assessed as Competent in the unit that makes up this Workbook you need to provide evidence which demonstrates you can perform the required competencies to the required standard.

Page 8


•

•	Written questions may be a combination of multiple choice, short answer or true or false
questions.
•

•

•	All questions if necessary will require a verbal interview from the Trainer to verify the responses.
•	If any supplementary documents are required to be submitted they must be marked with the

	Apply OHS requirements, policies and procedures in the construction industry

Assessment Workbook CPCCOHS2001A Apply OHS requirements, policies and procedures in the		CPC08 Construction, Plumbing and Services
	Training Package

1.2 Provide 5 examples of the following types of risks.
Verbally interviewed

Assessment Workbook CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industryV1

1.4 Complete the table below, outlining employer and employer responsibilities with respect to work health and safety.

Verbally interviewed

Assessment Workbook CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industryV1


	Set out general safety requirements and enforcement
WHS Regulations

Assessment Workbook CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industryV1	CPC08 Construction, Plumbing and Services Training Package

	CPC08 Construction, Plumbing and Services Training Package

Page 15

Assessment Workbook CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industryV1	CPC08 Construction, Plumbing and Services Training Package


Assessment Workbook CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industryV1	CPC08 Construction, Plumbing and Services Training Package

Assessment Workbook CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industryV1	CPC08 Construction, Plumbing and Services Training Package

Assessment Workbook CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industryV1	CPC08 Construction, Plumbing and Services Training Package