Service equipment and materials for balancing wheels and tyres

AURTTJ011 Balance wheels and tyres

Student Assessment Agreement



			 Yes
			 Yes

	Student Practical Demonstration of Tasks – AURTTJ011			Created Date:
			1.0	Last Modified Date:
© Trinity Institute (Australia) \| RTO Code: 41310 \| CRICOS Code: 03556F

Student Declaration

To be filled out and submitted with assessment responses


Student ID number	20200759

Assessor declaration

I hereby certify that this student has been assessed by me and that the assessment has been carried out according to the required assessment procedures.

Feedback

Student result response

					12th Aug 2019
Document No:			1.0
				Page Sequence:	Page 2 of 21

				Created Date:	12th Aug 2019
			1.0
© Trinity Institute (Australia) \| RTO Code: 41310 \| CRICOS Code: 03556F				Page Sequence:

	Satisfactory	or

Feedback to Student - Please provide general feedback on the Student’s performance

Student Declaration: - I verify that the work completed is my own and that I was adequately informed of the assessment process prior to commencing this
assessment task.

09/08/2021

Overview of Assessment
	1.
	2.
	3.	Assessment is based on the Assessment Requirements (R1) of AURTTJ011 Balance

wheels and tyres.

4. At any time, students may refer to technical manuals and their learning guides or Textbooks for further information.

Document Name: Student Practical Demonstration of Tasks – AURTTJ011 Created Date: 12th Aug 2019 Document No: Trinity Institute (Australia) – AURTTJ011 Version No: 1.0 Last Modified
Date:

AURTTJ011 Balance wheels and tyres

	Student Practical Demonstration of Tasks – AURTTJ011			Created Date:
			1.0	Last Modified Date:
© Trinity Institute (Australia) \| RTO Code: 41310 \| CRICOS Code: 03556F

	Student Practical Demonstration of Tasks – AURTTJ011			Created Date:
			1.0	Last Modified Date:
© Trinity Institute (Australia) \| RTO Code: 41310 \| CRICOS Code: 03556F

	Carry out a final inspection of the customers vehicle to ensure that the wheel and tyre balanced completed are to the workplace service standards, the vehicle

operates correctly, and the vehicle is clean, seat and floor cover removed and ready to be given back to the customer.

Assessment conditions

The assessment MUST:


	o

contingencies, as well as, using suitable facilities, equipment and

resources

o Four different wheels and tyres for balancing

o Wheel balancing machinery



Assessors of this unit MUST:
 Satisfy the assessor requirements in applicable vocational education and training legislation, frameworks and/or standards

Resources required

The following equipment MUST be made available to students:

AURTTJ011 Balance wheels and tyres

Document Name:
	Trinity Institute (Australia) – AURTTJ011	Version No:	1.0

Assessment 2 – Direct Observation
Practical Demonstration of Tasks

Job Card 1: Balance wheels and tyres
Job Details:
Upon completion of this task, you should be able to demonstrate how to balance wheels and tyres.

Procedure:

WARNING!
The Assessment will be STOPPED IMMEDIATELY if you are attempting to carry out any step in an unsafe or dangerous way.

Document Name:
	Trinity Institute (Australia) – AURTTJ011	Version No:	1.0

Document Name:
	Trinity Institute (Australia) – AURTTJ011	Version No:	1.0

Job Card 1

				(H)				(M) 0485232152
		City:				NSW		Post code:	2485

	Pulsar		Colour:				License No:
					Odometer Reading:
Engine No:							Trans Type:
Customer Concern

AURTTJ011 Balance wheels and tyres

AURTTJ011 Balance wheels and tyres

Document Name:
	Trinity Institute (Australia) – AURTTJ011	Version No:	1.0







Rectification:













Fluids	QTY	Tyre Report		Tech #	Time
			R/H/F		ON
		mm	mm
			R/H/R		ON
		mm	mm
		Brake Report
P/S Oil		L/H/F
		mm	mm
Other		L/H/R
		mm	mm

AURTTJ011 Balance wheels and tyres

	Student Practical Demonstration of Tasks – AURTTJ011			Created Date:
			1.0	Last Modified Date:
© Trinity Institute (Australia) \| RTO Code: 41310 \| CRICOS Code: 03556F

You MUST balance two (2) DIFFERENT wheels and tyres including: You MUST also:

 

2. Ask your trainer to direct you to a vehicle to work on. 3. You MUST answer the Assessor’s verbal questions 6. You MUST select the appropriate methods and techniques, balance four (4) DIFFERENT wheel and tyre as specified in the wheel balancer instructions.

Job Card 2

Customer Details

Customer:
Address:	38 Woodstock street		City:	State:	NSW	Post	2541
Address:	38 Woodstock street
Vehicle Details (Must fill in the vehicle details)

			Colour:
Make:	Pegeo	Model:	Colour:
			Odometer Reading:				Automatic
Engine No:	GQI8D5		Engine Type:	Diesel			Automatic

AURTTJ011 Balance wheels and tyres

AURTTJ011 Balance wheels and tyres

					12th Aug 2019
Document No:			1.0
				Page Sequence:	Page 19 of 21

Fluids		Tyre Report	Tech #	Job #	Time

Ensure that the following actions / tasks / checks in your work area have been performed:

a. Tools & equipment used are in working order and have been put away ready for use next time. Where necessary, tag any tools / equipment which had faulted during use and inform the Assessor about it. b. Waste materials is to be disposed of via the appropriate recycling methods or place in general waste. c. Ensure that any reusable materials are stored away appropriately and ready for reuse at another time. Make sure the work area is cleaned and tidy. All equipment is put away and report on any issues / faults d.