Select add create the client reservation

Chapter 3 Lab and Quiz

3.1.4 Install and Configure a DHCP Server
You work as the IT administrator for a small corporate network. You recently expanded the network to a second building. In doing so, you removed the consumer-grade internet router and installed a network router. You have decided to use CorpDHCP as a DHCP server to replace the DHCP service provided by the consumer-grade router.

Your Score: 4 of 4 (100%)
Pass Status:
Pass
Elapsed Time:
5 minutes 47 seconds
Required Score: 100%

c. Right-click CorpDCHP and select Connect.

From Server Manager, select Manage > Add Roles and Features. d.

j.Click Next.

k. Click Next because no additional features are required for the DHCP Server. l.In the DHCP Server window, click Next.

Click Close to close the DHCP Post-Install configuration wizard. d.

e. Click Close to close the Add Roles and Features wizard.

d. In the New Scope wizard, click Next.

e. In the Name field, enter the name of the scope and then click Next.

b. Click Next to ignore any exclusions and delays.

c. Enter 5 days as the lease duration and then click Next.

2. Right-click Scope [192.168.0.1] Subnet1 and select Activate.

3.1.5 Practice Questions

You have a network with 50 workstations. You want to automatically configure workstations with the ip address, subnet mask, and default gateway values.

3.2.4 Create DHCP Exclusion Range
You have just configured a scope on the CorpDHCP server to service the 192.168.0.0/24 subnet. You defined a scope to distribute IP addresses between 192.168.0.1 and 192.168.0.254. Now you need to prevent the DHCP server from assigning addresses to the servers and network devices.

In this lab, your task is to create an exclusion range to exclude addresses 192.168.0.1 to 192.168.0.29.

Create an exclusion range from 192.168.0.1 to 192.168.0.29

4. From Server Manager, select Tools > DHCP.

5. In the left pane, expand CorpDHCP.CorpNet.com.

11. Click Add.

12. Click Close to close the Add Exclusion Range dialog.

Your Score: 5 of 5 (100%)
Pass Status:

Pass
Elapsed Time:
2 minutes 59 seconds
Required Score: 100%

1. From Hyper-V Manager, select CORPSERVER.

2. Expand the window to view all virtual machines.
3. Right-click CorpDCHP and select Connect.

9. In the Reservation name field, enter a reservation name (such as the computer name). 10. In the IP address field, enter the IP address.

11. In the MAC address field, enter the MAC address. For Ethernet, the MAC address will look like c8ba99cd8012 or c8-ba-99-cd-80-12.

3.2.6 Practice Questions

You are a junior systems manager for you company’s network. There are 600 workstations

clients using a lease duration for four days.

You manage the westsim.com domain. The network has a single subnet with five servers running windows server. The 100 client computers are all windows desktops. One of the servers is configured as a dhcp server configured with a single scop for the 10.0.0.0/24 subnet.

You are installing dhcp in four subnets. Three of the subnets have windows desktop computers,

and the fourth subnet has only windows laptop computers.

You are the administrator of a large network with one location server several thousand users.

In this lab, your task is to complete the following:

1. Connect to the CorpDHCP virtual machine as follows: a. From Hyper-V Manager, select CORPSERVER.

b. To view all of the virtual machines, maximize Hyper-V Manager.

Right-click Server Options and select Configure Options. d.

e. Under Available Options, mark 006 DNS Servers.

j.Under Available Options, mark 015 DNS Domain Name.

k. In the String value field, enter CorpNet.com.

d. In the IP address field, enter 192.168.0.5.

e. Click Add to add the IP address to the list.

Anthony administers a single dhcp server for a network of three subnets.