Safety helmets and hand glove policies and procedures for this component task

CPCWHS3001 IDENTIFY CONSTRUCTION WORK HAZARDS AND SELECT RISK CONTROL STRATEGIES Use this template to describe the activities you undertook to develop your JSA. Make sure that your supervisor initials each section and, when you have completed all parts of the template, ask them to add their comments and endorse your work.


Describe the steps required for completion of this component.	Define potential risks to minimize hazards. Prepare the tools to be used.
	Gloves Boots Hammer Drill. Sledgehammer Pinch bar Pincers

	Non-smoking policy Drug and alcohol policy Health and safety policy Recruitment policy Discipline and termination policy
Component task 2: Remove bolts

Describe the steps required for completion of this component.	We will use the drill

Component task 3: Remove timber

What needs to be done?

Take out the nails from timber to separate the timber of plywood. We can use pinch bar and Sledgehammer.

requirements in relation to safety for this component task?
	Workers should wear strictly safety belts, safety belts, safety helmets and hand glove. Also, if machines such as power shovels carry out the demolition, bulldozers etc. the safety measures relevant to operation and use of such machines should be adhered to.

	Disassemble plywood.

What are the relevant legislative, NCC, Codes of Practice and Australian Standard requirements in relation to safety for this component task?	There are the relevant legislative, NCC, Codes of Practice and Australian Standard requirements in relation to safety for this component task
	Also, if machines such as power shovels carry out the demolition, bulldozers etc. the safety measures relevant to operation and use of such machines should be adhered to. Code of conduct.

	SDS is not include in this activity
What are the relevant legislative, NCC, Codes of Practice and Australian Standard requirements in relation to safety for this component task?
	Workers should wear strictly safety belts, safety belts, safety helmets and hand glove. Also, if machines such as power shovels carry out the demolition, bulldozers etc. the safety measures relevant to operation and use of such machines should be adhered to.


	There are the relevant legislative, NCC, Codes of Practice and Australian Standard requirements in relation to safety for this component task  Building Code of Australia (BCA), being Volumes One and Two (given effect through the Environmental Planning and Assessment Act 1979)
	Code of conduct.

Don’t forget to include PPE.	Gloves Glasses Boots

	 Building Code of Australia (BCA), being Volumes One and Two (given effect through the Environmental Planning and Assessment Act 1979)  Plumbing Code of Australia, being Volume Three (given effect through the Plumbing and Drainage Act 2011).


	SDS is not include in this activity
What are the relevant legislative, NCC, Codes of Practice and Australian Standard requirements in relation to safety for this component task?

Supervisor’

		Suitable evidence	s initials

task.

Discuss and confirm risk control strategies with relevant personnel.

required major effort to lift. Maintain a

proper position when lifting heavy