Router boots and enters setup mode

CCNA 1 Practice Final v5.0 Exam Answers 2015 (100%)	WWW.CCNA-v5.Net

• • • • •	It can rapidly adapt to the loss of data transmission facilities.

3. A medium-sized business is researching available options for connecting to the Internet. The company is looking for a high speed option with dedicated, symmetric access. Which connection type should the company choose?

	It is a standards body that develops cabling and wiring standards for networking. It is a protocol that establishes how computers within a local network communicate. It is an organization that enables individuals and businesses to connect to the Internet.
		Page 1

5. An administrator needs to upgrade the IOS in a router to a version that supports new features. Which factor should the administrator consider before performing the upgrade?

• • • •

6. Refer to the exhibit. A network engineer is attempting to connect to a new router to perform the initial configuration. The engineer connects a rollover cable from the serial port of a PC to the Aux port on the router, then configures HyperTerminal as shown. The engineer cannot get a login prompt in
HyperTerminal. What would fix the problem?

	Page 2

CCNA 1 Practice Final Answer 002 (v5.02, 2015)

• • • •

CCNA 1 Practice Final Answer 003 (v5.02, 2015)

10. A network administrator enters the service password-encryption command into the configuration mode of a router. What does this command accomplish?


		Page 3

CCNA 1 Practice Final Answer 004 (v5.02, 2015)

13. A network administrator is designing a new network infrastructure that includes both wired and wireless connectivity. Under which situation would a wireless connection be recommended?

•
	The end-user device requires a dedicated connection because of performance

	The end-user device needs mobility when connecting to the network.
	CCNA 5	Page 4

Using a tester, the administrator notices that the signals generated by the server NIC are distorted and not usable. In which layer of the OSI model is the error categorized?

• • • •

16. What makes fiber preferable to copper cabling for interconnecting buildings? (Choose three.)

• • • • • •

		WWW.CCNA-v5.Net
•	data link
•
•

19. What three statements describe features or functions of media access control? (Choose three.)

20. A frame is transmitted from one networking device to another. Why does the receiving device check the FCS field in the frame?

	Layer 3 address to a Layer 2 address Layer 3 address to a Layer 4 address Layer 4 address to a Layer 2 address Layer 2 address to a Layer 4 address


•	examining the destination MAC address to add new entries to the MAC address
table

• • • •	The IOS image is corrupt.

• • • • •	to identify missing segments at the destination to reassemble the segments at the remote location to specify the order in which the segments travel from source to destination to limit the number of segments that can be sent out of an interface at one time to determine if the packet changed during transit


•	This is a loopback address.
•	This is a link-local address.
•
•

	FEC0::/10? FDEE::/7? FEBF::/10 FF00::/8?

31. What are the three parts of an IPv6 global unicast address? (Choose three.)

	to inform routers about network topology changes to ensure the delivery of an IP packet to provide feedback of IP packet transmissions to monitor the process of a domain name to IP address resolution

33. Which statement describes a characteristic of the traceroute utility?

		WWW.CCNA-v5.Net
•	It utilizes the ICMP Source Quench messages.
•
•

CCNA 1 Practice Final Answer 006 (v5.02, 2015)


•	4


•	14

		Page 9

36. A small satellite office has been given the overall network number of 192.168.99.0/24 and the network technician can subdivide the network addresses as needed. The office needs network access for both wired and wireless devices. However, because of the security consideration, these two networks should be separate. The wired network will have 20 devices. The wireless network has a potential connection of 45 devices. Which addressing scheme would be most efficient for these two networks?

•	192.168.99.0/26 192.168.99.64/27 192.168.99.0/27 192.168.99.32/26 192.168.99.0/27 192.168.99.32/28 192.168.99.0/28 192.168.99.16/28 192.168.99.0/28 192.168.99.64/26

(Choose two.)

• • • • •

CCNA 1 Practice Final v5.0 Exam Answers 2015 (100%)

41. Refer to the exhibit. An administrator is testing connectivity to a remote device with the IP address 10.1.1.1. What does the output of this command indicate?

	A ping packet is being blocked by a security device along the path. The connection timed out while waiting for a reply from the remote device.

42. Which is a function of the show ip route command when used as a tool for troubleshooting network connectivity?

•	The workstation NIC has malfunctioned.


•	The workstation is unable to obtain an IP address from a DHCP server.
		Page 11

• • • •	ipconfig /all arp -a ipconfig /displaydns nslookup

46. Refer to the graphic. What is the effect of setting the security mode to WEP on the Linksys integrated router?

	It allows the access point to inform clients of its presence. It translates IP addresses into easy-to-remember domain names.

CCNA 1 Practice Final Answer 009 (v5.02, 2015)

51. Match each item to the type of topology diagram on which it is typically identified. (Not all options are used.)

CCNA 5	Page 13

CCNA 1 Practice Final Answer 011 (v5.02, 2015)
53. Match the subnetwork to a host address that would be included within the subnetwork. (Not all options are used.)

	Page 14

CCNA 1 Practice Final Answer 012 (v5.02, 2015)

54. Open the PT Activity. Perform the tasks in the activity instructions and then answer the question.

The Server0 message is winner .?