Read the imperial micrometer below and workout the measurement

AURTTK001 Use and maintain measuring equipment in an automotive workplace

Student Name

24 august 2020

Unit End Date

This cover sheet is to be completed by the student and assessor and used as a record to determine student competency in this assessment task

The assessment process and tasks were fully explained.

Yes / No

I have access to all required resources?

Yes / No

Cheating & Plagiarism Declaration

Student Declaration: In accordance with The RTO Plagiarism Policy, I hereby acknowledge by signing this declaration that I have not cheated or plagiarised any work regarding the assessment tasks undertaken in this unit of competency except where the work has been correctly acknowledged.

Date

_19 _____ /
_september_____ / 2020____

Assessment Results

AURTTK001 Use and maintain measuring equipment in an automotive workplace

Student Name: parwinder singh
			Date

	Student Written Knowledge Assessment – AURTTK001			Created Date:
			1.0	Last Modified Date:
©Trinity Institute (Australia)\| RTO Code: 41310 \| CRICOS Code: 03556F

	Student Written Knowledge Assessment – AURTTK001			Created Date:
			1.0	Last Modified Date:
©Trinity Institute (Australia)\| RTO Code: 41310 \| CRICOS Code: 03556F

●	−
	−	http://www.wonkeedonkeetools.co.uk/calipers/how-do-you-look-after-a-vernier-
	caliper/
	−	http://www.wonkeedonkeetools.co.uk/micrometers/what-is-a-digital-micrometer
	−	http://www.wonkeedonkeetools.co.uk/micrometers/how-does-the-scale-of-an-

	−

Results/Re-assessment

Reasonable Adjustment

AURTTK001 Use and maintain measuring equipment in an automotive workplace

1.

equipment in an automotive workplace?

2.	What precautions should be taken when using a tyre pressure gauges with compressed air?


Inside micrometre is used for measuring the inner diameter of an object.

AURTTK001 Use and maintain measuring equipment in an automotive workplace



10 Thimble lock.
11 Spindle.

AURTTK001 Use and maintain measuring equipment in an automotive workplace

6. Each number on the sleeve of a metric micrometer represents ___5____ mm?

A. .05.

7. When using an inside micrometer to measure a cylinder bore, what are the two parts that come in contact with the bore?

A. Spindle and thimble.
B. Anvil and thimble.

					12th Aug 2020
Document No:			1.0
				Page Sequence:	Page 21 of 29

D. Micrometers need to be checked for accuracy.

9. Explain the operation of the outside micrometer when measuring an object?

AURTTK001 Use and maintain measuring equipment in an automotive workplace

11. Explain how to use an inside micrometer.

Multiple Choice question. Select the correct answer.

12. What are the advantages of using a digital micrometer?

13. Read the imperial micrometer below and workout the measurement. The graduations on the sleeve each represent 0.025 inch.

AURTTK001 Use and maintain measuring equipment in an automotive workplace

Document Name:	Student Written Knowledge Assessment – AURTTK001
		Version No:	1.0	Last Modified Date:

14. What four (4) maintenance activities should be carried out on a micrometer to ensure accuracy?






3 The micrometer should be stored in a well-ventilated place of low humidity and in a storage case.
4 Always ensure there is a gap between the measuring faces.

AURTTK001 Use and maintain measuring equipment in an automotive workplace





10 Outside measuring surface.

AURTTK001 Use and maintain measuring equipment in an automotive workplace


The Vernier scale contributes the second decimal place to the reading.
Final reading is the summation of the Vernier scale reading and the main scale reading.

AURTTK001 Use and maintain measuring equipment in an automotive workplace

19. Name the different types of Vernier calipers below.

AURTTK001 Use and maintain measuring equipment in an automotive workplace

AURTTK001 Use and maintain measuring equipment in an automotive workplace

22. Identify some common uses of a Dial indicator?

C. 0mm to 1000mm.

D. None of these answers are correct.


Document No:	Insert RTO Name – AURTTK001		1.0
					Page 21 of 29

AURTTK001 Use and maintain measuring equipment in an automotive workplace

29. What is a straightedge used for?

Answer: Used for drawing straight lines or checking the straightness of a line.

31. What are feeler gauges?

AURTTK001 Use and maintain measuring equipment in an automotive workplace

34. Name the following pressure gauges?

					12th Aug 2020
Document No:			1.0
				Page Sequence:	Page 21 of 29

Compression cylinder pressure tester.