Most radar applications the sampling rate
where nv is the nth blind speed. If λ is measured in meters,fp in Hz, and the relative velocity in
knots, the blind speeds are
| v | = | n | f | p | ≈ | n | f | … (10) | |
|---|---|---|---|---|---|---|---|---|---|
| n | 1.02 | ||||||||
The pulse doppler radar is more likely to use range-gated doppler filter-banks than delay-line cancelers. Also, a power amplifier such as a klystron is more likely to be used than a delay-line cancelers. A pulse doppler radar operates at a higher duty cycle than does an MTI. Although it is difficult to generalize, the MTI radar seems to be the more widely used of the two, but pulse doppler is usually more capable of reducing clutter. .
|
|---|
