Execution error process aborted

1056	Appendix
Table 16.24	Coding of the Case 3 command VERIFY as specified by ISO/IEC 7816-4, with the

principal options

Data	Code

CLA	'00'
INS	'20'

transferred data to reference data (typically a PIN).

P1	'00'
	. . .
			Reference data valid for the entire smart card
			(global reference data) is used.

RFU bits.

Reference data identification number.

Lc	. . .
DATA	. . .

ISO/IEC 7816-4 standard.77The following status codes are used:

NP: process completed, normal processing WP: process completed, warning processing

Table 16.25
Return code	Status		Standard
'61xx'	NP	Command successfully executed; ‘xx’ bytes

of data are available and can be requested
using GET RESPONSE.

'6281'	WP	The returned data may be erroneous.	ISO/IEC 7816-4
'6282'	WP		ISO/IEC 7816-4

'6283'	WP		ISO/IEC 7816-4

'6284'	WP	The file control information (FCI) is not	ISO/IEC 7816-4

structured in accordance with ISO/IEC
7816-4.

'62xx'	WP	Warning; state of non-volatile memory not

16.10
Table 16.25		(Cont.)
'63Cx'		WP	The counter has reached the value ‘x’ (0 ≤ x ≤ 15) (the exact significance depends on the command).
'63xx'	WP

'64xx'	EE	Execution error; state of non-volatile memory	ISO/IEC 7816-4

not changed.

'6581'	EE	Memory error (e.g. during a write operation).
'65xx'	EE	Execution error; state of non-volatile memory

'6700'	CE		GSM 11.11

ISO/IEC 7816-4

'67xx'. . .	CE	Check errors.	ISO/IEC 7816-4

'6800'	CE		ISO/IEC 7816-4

'6881'	CE		ISO/IEC 7816-4
'6882'	CE	Secure messaging not supported.	ISO/IEC 7816-4
'6900'	CE	Command not allowed (general)	ISO/IEC 7816-4
'6981'	CE		ISO/IEC 7816-4
'6982'	CE		ISO/IEC 7816-4
'6983'	CE		ISO/IEC 7816-4
'6984'	CE		ISO/IEC 7816-4

(invalidated).

'6985'	CE	Usage conditions not satisfied.	ISO/IEC 7816-4
'6986'	CE		ISO/IEC 7816-4
'6987'	CE		ISO/IEC 7816-4

'6988'	CE		ISO/IEC 7816-4
'6A00'	CE	Incorrect P1 or P2 parameters (general).	ISO/IEC 7816-4
'6A80'	CE	Parameters in the data portion are incorrect.	ISO/IEC 7816-4
'6A81'	CE	Function not supported.	ISO/IEC 7816-4
'6A82'	CE		ISO/IEC 7816-4
'6A83'	CE		ISO/IEC 7816-4
'6A84'	CE		ISO/IEC 7816-4
'6A85'	CE		ISO/IEC 7816-4
'6A86'	CE	Incorrect P1or P2 parameter.	ISO/IEC 7816-4
'6A87'	CE	Lc inconsistent with P1 or P2.	ISO/IEC 7816-4
'6A88'	CE		ISO/IEC 7816-4
'6B00'	CE		GSM 11.11

'6Cxx'	CE		ISO/IEC 7816-4

length.

'6D00'	CE	Command (instruction) not supported.	GSM 11.11

'6E00'	CE		GSM 11.11