Your question:

Question 1: Demonstrate Internetworking using two routers by implementing static routing. Utilize Cisco Packet Tracer software.

Question 2: Demonstrate subnetting using Class C IP addressing by creating a scenario in Cisco Packet Tracer software.

d) NETVIEW

e) TRACERT

Assignment Help Answers with Step-by-Step Explanation:

2. Drag and drop two routers into your workspace. Connect them using serial DCE/DTE cables or Ethernet cables.

3. Assign IP addresses to the router interfaces:

4. Configure static routes on each router to reach the networks on the other side. For Router 1:

- `ip route 192.168.2.0 255.255.255.0 192.168.1.2`

To demonstrate subnetting using Class C IP addressing in Cisco Packet Tracer, follow these steps:

1. Create a network scenario in Cisco Packet Tracer.

Question 3: Demonstrate networking command

To demonstrate the networking commands using Cisco Packet Tracer, follow these steps:

- Open a Command Prompt on a Windows PC.

- Use the `ipconfig` command to display the IP configuration information of the PC.

- Please specify the tool or application you want to demonstrate.

e) TRACERT: