And select the remote access policies node

Modem			Internet
	Server		Internet
	Server		VPN
LAN	NIC	NIC		ISP

	Used to specify whether server will be configured as a router for LAN only, as a router for a LAN and demand-dial routing, as a RAS, or both a router and a RAS
Security

	Used to configure Point-to-Point Protocol to specify whether a remote client can establish multilink connections
Event Logging

Open Routing and Remote Access console if necessary

maximum amount of information option button and the Enable Point-to-Point (PPP) logging check box if you want to
troubleshoot connection problems.

3. Right-click Local File in the Details pane and click Properties 4. On the Settings tab of the Local File Properties dialog box, select Log Accounting Requests to capture accounting requests and responses
Select Log Authentication requests to capture authentication 5.

requests such as access-accept packets, and access-reject packets.

Remote Access Policies are used to:
Control what connections attempts will be rejected Determine which users can access the network and to prevent unauthorized access.

Determine connection time, etc.

	Creating a Remote Access Policy
	1.	Open Routing and Remote Access console if necessary
	2.

5. Click Next to open the Conditions screen. Click Add… to open the Select Attribute dialog box.

6. Select Day-and-Time restrictions in the name column and click Add… to open the Time of day constraints dialog box.

8. Click OK

9. Click Add… to reopen the Select Attribute dialog box.

11. Click OK to close the Select Groups dialog box. Click OK

to close the Groups dialog box.

exercise.

Note: Can use the Net Shell (Netsh) command-line utility to manage and troubleshoot RRAS. 15